掌握圓環鏈條的最新加工技術
點擊次數：793 更新時間：2013-06-28 來源：
今天我們為大家介紹幾種常用的圓環鏈條的制作流程重點，希望能有所幫助。主動測厚的資料連軋領先工藝、噴丸、擠孔、滾子冷擠壓成形、鏈板高速屢次光亮沖裁、四點鉚頭、雙面打印等新工藝，內行業界開端選用，這在必定程度上提高了鏈條產物的質量。鏈條零件通常都選用熱處置網帶爐進行淬火和回火，質量較安穩，離散度可控制在3－4度。
Today we introduce several commonly used production process key ring chain, hoping to help. Leading active materials thickness and rolling technology, shot peening, hole, roller, chain plate high speed cold extrusion forming repeatedly light cutting, riveting head, double-sided printing and other new technology, at four o 'clock start adept industry selection, the extent, improve the quality of the product chain. Chain parts usually choose heat treatment of mesh belt furnace for quenching and tempering, quality is stable, the discrete degree can be controlled in 3 to 4 degrees.
鏈條零件的強韌化處置、滲鉻、滲硼、等溫淬火以及淬火介質的“以水代油”等新工藝，也相繼使用。對鏈條進行潤滑是必須進行的保養，這樣不僅可以提高工作效率，還能延長鏈條的使用壽命。用油泵壓力進行噴油潤滑，這是由油泵向鏈條連續供油，這樣循環就起到了潤滑和冷卻的作用。
Chain components of very tough disposal, the chromizing, boronizing, isothermal quenching and quenching medium of new technology, such as "generation of oil to water and use. The chain lubrication maintenance is a must, such not only can improve the work efficiency, also can prolong the service life of the chain. Using the spray lubrication oil pump pressure, this is from the pump to the continuous oil supply chain, so cycle would have played an important role in lubrication and cooling.
油浴潤滑或者飛濺潤滑，這是采用密封的傳動箱體，把鏈條的一部分浸入油中，后面的則是靠甩油盤濺油。
Oil bath lubrication or splash lubrication, it is USES the seal of the transmission box, the part of the chain into oil, at the back of the oil pan oil splashing is on.
當前位置：